Discharge - CSR Turn and Lock (TAL)

These single–ended metal halide lamps are especially useful for moving–light applications that call for high colour temperatures and brighter light sources. The ‘Turn And Lock’ technology provides easy installation. A very short arc gap allows for higher beam intensity. This enables good system performance, colour stability and superior lumen maintenance over life. Easy release base (Turn And Lock) enabling quick lamp change at events- High lumen output.

Products

Product code Description Wattage
[W]
Lumen [lm] Base
76497 76161 CSR700/TAL/PGJX50 700 50000 PGJX50
76521 76160 CSR300/2/TAL 300 23000 PGJX28
76577 78718 CSR700/TAL/PGJX28 700 50000 PGJX28
145967 74873 CSR1500/TAL/60/S 1500 PGJX50
Warning

Risk of electric shock
  • Turn power off inspection, installation or removal
  • Do not use where directly exposed to water or outdoors without an enclosed fixture

Risk of fire
  • Keep combustible materials away from lamp
  • Use in enclosed fixture rated for this product

Lamp emits UV radiation which may cause eye/skin injury. RG3
Avoid exposure of eyes and skin to unshielded lamp

Unexpected lamp rupture may cause injury, fire or property damage
  • Do not exceed rated wattage or voltage
  • Do not touch glass with bare hands
  • Use in enclosed fixture rated for this product
  • Do not use lamp if outer glass is scratched or broken
  • Use only properly rated ballast
  • Operate lamp only in specified position
  • Do not store flammable materials near/below lamp
  • Do not use beyond rated life
  • Do not turn on lamp until fully installed

Caution

Risk of burn
  • Allow lamp to cool before handling
  • Do not turn on lamp until fully installed

Lamp may shatter and cause injury if broken
  • Do not use lamp if outer glass is scratched or broken
  • Dispose of lamp in a closed container
  • Do not use excessive force when installing lamp

Cut hazard - possible jagged glass
Wear gloves when handling