Euro 2

Euro-2 & Euro-7 are suitable for applications ranging from busy motorways to urban street environments. Key features include a high degree of protection of the optical assembly (IP66), and a system for adjusting the lamp holder into 28 possible geometries, easily modified on site to reach the required photometrics.

  • Tilting mounting device, 60mm for pole, 60-76mm for post-top
  • Mounting angles between 0º, 5º and 10º steps horizontally and vertically
  • HPS and Metal Halide (Euro-7 up to 600W, Euro-2 up to 250W)
  • Top opening for tool-less access to lamp and control gear, tool-less relamping


Structures and materials
Housing: two part housing in die-cast aluminum, electrostatically sprayed with a polyester powder paint finish, following anti-corrosion priming and oven-cured at 180ºC.
Mounting system: easily adaptable to pole or post-top applications, using the same spigot and without the need to specify this beforehand. Possibility of 0º, 5º & 10º inclination in either of the two mounting options.
Standard color: RAL7035. Other RAL colors available on request.

Electrical and gear compartment
Ballast support board: manufactured in galvanized sheet and mounted into the lower housing, easily removable. Ballast, ignitor and capacitor are mounted on this board.
Gear tray: supports HPS and Metal Halide up to 600W in the Euro 7 and up to 250W in the Euro 2

Optics
Glass: curved transparent tempered glass.
Optical assembly: glue silicone sealed between the reflector and the glass.
Lampholder: polyamide, fixture reinforced with glass fiber and resistant to high temperatures.
Reflector neck and lamp holder: is made from polyamide that is highly temperature resistant, the gasket is made from silicone. It also includes a breather. The lamp holder includes horizontal and vertical adjustment therefore multiple photometric distributions are possible.

Maintenance
Top opening for tool-less access to the lamp and control gear. Lamp replacement without tools.

Accessories/options
  • Die-cast aluminum tilting device, 60mm for pole and 60-76mm for post-top mounting,tilt in 5º steps horizontally and vertically.
  • Euro7 includes additional gasket around housing to be IP66
  • Electronic versions up to 150W.
  • Bi-level magnetic ballast.
  • Class II with magnetic ballasts.