Euro 2

Euro-2 & Euro-7 are suitable for applications ranging from busy motorways to urban street environments. Key features include a high degree of protection of the optical assembly (IP66), and a system for adjusting the lamp holder into 28 possible geometries, easily modified on site to reach the required photometrics.

Products

Product code Description Lamp cap Weight (kg) Downloads
21077 519731 EURO-2 HPS 100W RC E40 10.20
21157 519724 EURO-2 HPS 70W E27 9.60
21172 519723 EURO-2 HPS 50W E27 9.60
21183 519728 EURO-2 CMH SW 150W E40 10.60
21192 519729 EURO-2 CMH 250W E40 11.60
21829 519730 EURO-2 HPS 70W RC E27 9.60
  • Tilting mounting device, 60mm for pole, 60-76mm for post-top
  • Mounting angles between 0º, 5º and 10º steps horizontally and vertically
  • HPS and Metal Halide (Euro-7 up to 600W, Euro-2 up to 250W)
  • Top opening for tool-less access to lamp and control gear, tool-less relamping


Structures and materials
Housing: two part housing in die-cast aluminum, electrostatically sprayed with a polyester powder paint finish, following anti-corrosion priming and oven-cured at 180ºC.
Mounting system: easily adaptable to pole or post-top applications, using the same spigot and without the need to specify this beforehand. Possibility of 0º, 5º & 10º inclination in either of the two mounting options.
Standard color: RAL7035. Other RAL colors available on request.

Electrical and gear compartment
Ballast support board: manufactured in galvanized sheet and mounted into the lower housing, easily removable. Ballast, ignitor and capacitor are mounted on this board.
Gear tray: supports HPS and Metal Halide up to 600W in the Euro 7 and up to 250W in the Euro 2

Optics
Glass: curved transparent tempered glass.
Optical assembly: glue silicone sealed between the reflector and the glass.
Lampholder: polyamide, fixture reinforced with glass fiber and resistant to high temperatures.
Reflector neck and lamp holder: is made from polyamide that is highly temperature resistant, the gasket is made from silicone. It also includes a breather. The lamp holder includes horizontal and vertical adjustment therefore multiple photometric distributions are possible.

Maintenance
Top opening for tool-less access to the lamp and control gear. Lamp replacement without tools.

Accessories/options
  • Die-cast aluminum tilting device, 60mm for pole and 60-76mm for post-top mounting,tilt in 5º steps horizontally and vertically.
  • Euro7 includes additional gasket around housing to be IP66
  • Electronic versions up to 150W.
  • Bi-level magnetic ballast.
  • Class II with magnetic ballasts.