Eurostreet

Eurostreet series feature a wide range of street lights with HPS and MH lamps up to 150W (ET25) and 400W (ET40). Eurostreet luminaires are suitable for urban streets, major roads, motorways, and parking area lighting.

Products

Product code Description Lamp cap Weight (kg) Downloads
17410 42651 ET 25 G HPS 50W E27 5 Available
17419 42639 ET 40 G HPS 250W E40 11.10 Available
23789 42610 ET 25 G HPS 70W E27 5.70
23804 42611 ET 25 P HPS 70W E27 5.40 Available
23819 42613 ET 25 G HPS 100W E40 6.10
23834 42628 ET 25 P HPS 100W E40 5.80 Available
23849 42629 ET 25 G HPS 150W E40 8.40
23864 42634 ET 25 P HPS 150W E40 8.10 Available
23879 42652 ET 25 G CMH 150W E40 8.40 Available
23903 43668 ET 25 P CMH 150W E40 8.10 Available
23942 42641 ET 40 G HPS 400W E40 12.20
23957 42642 ET 40 G MH 250W E40 11.10 Available
23972 42650 ET 40 G MH 400W E40 12.20 Available
23996 42592 ET 40 G CMH 250W E40 11.10 Available
24011 42593 ET 40 G CMH 400W E40 12.20
  • Pole or post-top mounting with a diameter of 42 to 76mm
  • Tilt angle between -5º and +15º.

Structures and materials
Housing: in two parts (housing and cover) in glass fiber reinforced thermoplastic polymer, injection molded and UV stabilized results in a housing and cover that offers exceptional mechanical resistance and high resistance to chemical agents.
Support base: pole or post-top mounting with a diameter of 42 to 76mm, by way of a cast aluminum adapter, with the possibility of adjusting the luminaries tilt angle between –5º and +15º.
Latch: the housing and the cover are hinged at the front and secured by three captive springs of the same sort of plastic and stainless steel springs.
Screws: stainless steel.

Electrical and gear compartment
Ballast support board: mounted on removable insulating plate, made from glass fiber reinforced polyamide. Incorporates an automatic power cut-off switch when the cover is opened.
Wiring: with silicone wires and PG 13.5, tear-proof cable –clamp for 6-12mm wires.
Insulation: Class II.

Optics
Glass: 4mm flat tempered glass lens. T25 models also available in transparent, UV-stabilized injection molded polycarbonate bowl.
Lampholder: multi-position support allowing lamp adjustment for optimal light distribution.
Reflector: computerized design 99.85% pure anodized and polished aluminum,with “cut-off” beam.
Reflector neck: polyamide, high-temperature resistant.
Gasket: silicone rubber and polyurethane foam gaskets.

Maintenance
Lamp replacement easy, fast and safe by opening fitting head.

Accessories / options
  • Ø60 mm wall mounting support
  • Ø60 mm asymmetrical mounting support
  • ET25 – smaller housing
  • ET40 – large housing

(G = glass, P = polycarbonate – curved version)