Tunnel LED

The Tunnel LED is designed to deliver efficient lighting of low speed tunnels as well as underpasses, parking garages and industrial areas. Its use creates a safe environment for traffic with white light for improved visibility and comfort, as well as an outstanding six years /24 hours a day operation with the same light source.

  • 70 CRI at 5700K CCT
  • Hermetically sealed providing full IP66
  • Symmetrical and asymmetrical (wide/medium) light distribution
  • Ambient temperature from -30 to +40ºC
  • Fixture spacing: 7.5 to 12 m
  • Recommended mounting height 5.5m

Structures and materials
Housing: die cast aluminum housing electrostatically sprayed with a polyester powder paint finish, following anti-corrosion priming, and oven cured at 180ºC.
Meets 2G vibration standards.
Standard color: RAL 7001, silver.

Electrical and gear compartment
Integral dimmable 0-10V driver: isolated from the environment with a protection degree IP66.
Nominal line voltage: 200-277 V 50/60 Hz. PF>0.9. Class: I
Cable: anchorage for supply connection.
Ambient temperature: –30ºC to +40ºC.

Optics
Optical assembly: hermetically sealed providing IP66. Thanks to the advance LED optical systems the fixture provide high uniformity and improved vertical light distribution.
CRI: 70.
CCT: 5700 Kelvin.
  • Type III. Asymmetric Medium distribution (AM) – 90W system consumption
  • Type II. Asymmetric Wide distribution (AW) – 90W system consumption
  • Type V. Symmetric distribution (SY) – 90W system consumption

Maintenance
70% lumen maintenance at 50,000 hours.

Installation
Two kits available for the installation.
One is for ceiling mounted fixture (with the symmetric distribution optical option). The other kit is for Wall Mounted fixture (with an asymmetric distribution optical option).
A quick connector will allow an easy installation.
Fixture spacing: 7.5 to 12 meters. Recommended mounting height is 5.5m.