The Odyssey luminaire is a high performance road lighting fitting optimized for Streetwise™ lamps. Odyssey operates with CMH and HPS lamps of up to 150W and its high-efficiency photometric reflector makes it ideal for installations with demanding lighting level requirements. Maintenance is simple, with tool-less access to the optical compartment allowing quick and easy lamp replacement.


Product code Description Lamp cap Downloads
21451 73996 ODYSSEY VC HPS 100W E40
21484 522531 ODYSSEY SW VT CMH SW 100W E40 Not Available
21511 522534 ODYSSEY SW VT CMH SW 150W E40
32655 73993 ODYSSEY VC HPS 50W E27
21404 73994 ODYSSEY VT HPS 70W E27
21475 522530 ODYSSEY SW VT CMH SW 70W E27
21549 73998 ODYSSEY SW VC CMH SW 70W E27
  • Adjustable: ±15º horizontal and +15º vertical mounting
  • Tool-less entry, clip in gear tray
  • IP66 for the optics and electrical compartment
  • Optimized for CMH StreetWise™ and HPS lamps

Structures and materials
Housing: in two pieces (housing and door), both in die-cast aluminum with a polyester powder paint finish and oven cured.
Support base: adjustable. ±15º horizontal and +15º vertical mounting through Ø48-60 mm pole, with optional accessory for Ø34-42 mm pole.
One unique latch included in the lower housing allowing an easy luminaire opening.
Screws: stainless steel.
Standard color: silver grey. Other RAL colors available on request.

Electrical and gear compartment
Ballast gear tray: made from high temperature resistant polyamide for magnetic ballasts and aluminum for electronic ballasts.
Electrical connection: when the fixture is opened the supply is automatically disconnected, via a connector mounted in the upper and lower housings.

Glass: curved or flat tempered, sealed to the reflector through silicone seal.
Lampholder: ceramic E27 or E40. Multi-position support allowing lamp adjustment for optimal light distribution.
Reflector: high purity aluminum in one piece, finish achieved through anodizing process.
Two options:
  • optimized for HPS lamps
  • optimized for CMH StreetWise™ lamps

Optical assembly: silicone sealed with gasket in reflector neck and sealed to the housing. A breather is included to make sure IP rating is maintained over different environmental conditions.

  • Automatic electrical disconnection when opening the luminaire
  • Tool-less access to the optic compartment by opening the latch
  • Easy and quick lamp replacement by manually removing the lamp holder support from the front of the luminaire
  • A “twist and lock” mechanism releases the lamp holder from the reflector neck

  • Electronic ballasts version up to 150W with optional timed power reduction device
  • Electronic ballast version up to 150W
  • Magnetic ballasts available with: bi-level, controlled via switched contacts, bi-level with clock, bi-level with astronomic clock
  • Available with NEMA socket

Available options:
  • RC – Bi power system
  • C2 – Class II,
  • EB – Electronic ballast for Odyssey